Endurance-AT Truck Scale
Press and move to zoom.
Mouse over image to zoom.

Endurance-AT Truck Scale

Product Code:EDR-7011-AT KIT

The B-TEK name has long been synonymous with extremely well built truck scale products designed to provide many years of dependable, trouble-free service. 

B-TEK is devoted to offering a complete line of truck scales to meet any application requirement, from a new installation to a precise fitting retrofit of an existing concrete foundation. Decades of application experience ensures B-TEK truly understands customer truck weighing challenges and is able to deliver a scale solution.

The Endurance-AT was developed by leveraging our years of experience in truck scale design, innovation and fabrication. The Endurance-AT balances the need for weighbridge strength coupled with superior quality load cells and overall affordability. The time proven bridge-beam design weighbridge features 12-inch tall WF-beams spaced tightly for strength under load. All beams and plates are thoroughly cleaned by centrifugal shot blast equipment prior to receiving a two-coat, epoxy and polyurethane paint system. The hermetically-sealed, stainless steel compression column load cells are impervious to outdoor elements and provide complete protection from surge voltage and lightning.

The Endurance-AT is a perfect fit for commercial manufacturing, light industrial, and seasonal farming applications. B-TEK offers a full range of weighing terminals, printers, scoreboards, and other peripherals to complete your truck scale package.

*Please note that all truck scales currently hold an additional 12% surcharge on top of distributor net
    • EA
This kit contains:
  • NTEP COC: 03-096A3
  • Type: Above ground flat top
  • Scale Capacity: Up to 200,000 lb
  • Concentrated Load Capacity: 70,000 lb
  • Scale Height: 16” (Standard)
  • Scale Dimension: 69’ 10-1/2” x 10’ 10-1/2”
  • Weighbridge Deck: 1/4” tread plate decking
  • Steel Preparation: Commercial blast cleaning SSPC-SP6
  • Paint: Corrosion, abrasion and impact resistant, two-part polyaspartic, 5-7 mil DFT
  • Load Cell: 77,000 lb CPR-M analog compression column load cell, 700 Ohm, 2 mV/V, Stainless steel hermetically sealed (IP68/69K) construction.
  • Load Cell Cable: Stainless steel sheathed cable with clear polymer protective coating, integral
  • Electrical: Junction Box: NEMA 4X stainless steel enclosure(s) and 4-cell summing board with GDT surge protection
  • Surge Protection: CPR-M analog load cells utilize ground straps and base plate isolation disc Surge protection enhanced by Tripp Lite Isobar Ultra 4-Outlet line transient protection device
Options and Accessories
  • D700 desk-top digital indicator
  • Epson TM-U295 ticket printer