HRCS High Resolution Counting Scale
Press and move to zoom.
Mouse over image to zoom.

HRCS High Resolution Counting Scale

Product Code: 825-300002

The High Resolution Counting Scale (HRCS) combines exceptional accuracy, reliability and robustness in a single design. The HRCS can be set up as a high-resolution counting scale, high-resolution checkweighing scale or a high-resolution standalone bench scale.
• Non-NTEP
• Standard capacities: 2, 10, 70 and 175 lb
*1, 5, 20, 50 and 100 lb capacities available through custom setup. Requires part number 825-300199 to configure and calibrate.
• 1 billion internal count resolution using the high accuracy of the Quartzell transducer
• Aluminum die-cast clamshell base with 1100% overload and shock protection
• Available applications:
• Counting application with 40 PLU piece weight data storage (keypad required)
• Checkweighing
• High Resolution Balance for general weighing
• (3) Stainless steel weighing platter with adjustable Feet
• Backlit display with seven 0.5 inch segments

• Units: lb, kg, g, oz, and custom
• Ports: Comes standard with (2) Serial ports, (1) Ethernet, (3) Inputs and (3) Outputs
(2) RS232 serial ports (green connector)
(1) Mini USB VCP port: connected in parallel with COM2 or consumes COM2 if used
(1) Ethernet port (local base: client or server. Dual base: server only)
(1) Analog port (green connector) only active when optional 5V analog card is fitted
(1) Side RJ45 connector dedicated for remote keyboard only
(1) 9V DC power socket to allow the base or indicator to be powered from the DC socket on the rear of the base or directly from the rear of the indicator

Indicator Accessories
HRCS Replacement Indicator
Remote Numeric Keypad (Required for Second Base or PLU Storage)
HRCS Light Stack Red, Yellow, Green IP67 with Audible Alarm (Requires 825-300073 Light Bracket)
HRCS Light Stack Red IP67 with Audible Alarm (Requires 825-300073 Light Bracket)
HRCS Wired Barcode Scanner
HRCS Wireless Barcode Scanner

Relay Options
HRCS 2.5 TO 28 DC Volt Input Module
HRCS 10 TO 32 AC/DC Volt Input Module
HRCS 90 TO 140 AC/DC Volt Input
HRCS 5 TO 60 DC Volt Output Module
HRCS 120/240 VAC Output Module
HRCS .5AMP SPST Normally Open Dry Contact Relay
HRCS OPTO Board Enclosure IP69K
HRCS OPTO Board Only (3 Inputs / 3 Outputs) AC/DC

Battery Options 
HRCS Internal Rechargeable Battery Kit

Power Supply and Cord Options
HRCS Counting Scale, Power Supply
HRCS Counting Scale, Power Cord

Column and Bracket Options
HRCS Glass Draft Shield 2-10 lb Models
HRCS Ball Top Shroud Only Available for 12" x 14" Scales
HRCS Underhook 2 - 10 lb 6" Diameter Only
HRCS Underhook 70 lb 9" x 12" Base Only
HRCS Rear Light Bracket
HRCS Clamp Down Plate Kit
HRCS Rear Plate Protector
HRCS Column 15"
HRCS Column 23" (Supplied with cable 825-300074)
HRSC Indicator Desk or Wall Bracket (Supplied with cable 825-300074)

Software 
Btools Configuration and Development Software

Leads and Cables
10' Remote Cable to Extend HRCS Indicator from HRB Base (RJ45 Both Ends)
25' Remote Cable to Extend HRCS Indicator from HRB Base (RJ45 Both Ends)
50' Remote Cable to Extend HRCS Indicator from HRB Base (RJ45 Both Ends)
RS232 Interconnect Cable HRCS Base to HRB Base 10' (RJ45 to stripped ends)
RS232 Interconnect Cable HRCS Base to HRB Base 25' (RJ45 to stripped ends)
RS232 Interconnect Cable HRCS Base to HRB Base 50' (RJ45 to stripped ends)
Scanner Serial Com Cable Assembly, RS232, DP9 Female on one end, pig tales on opposite end, 5' + 5V on PIN 4
Serial Com Cable Assembly, RS232, DP9 Female on one end, pig tales on opposite end, 5'
Serial Com Cable Assembly, RS232, DP9 Female on one end, pig tales on opposite end, S 10'
20 in HRCS to HRB Connection Cable RJ45 on each end

Option Cards - Please note: Only one option card can be installed in the HRCS
HRCS 2nd Scale Analog Option Card, Other than HRB (Requires 825-300048 HRCS Remote Keypad)
HRCS RM300 Wireless Ethernet Communication (802.11a/b/g/n) Module and Antenna